Angiotensin-converting enzyme; Members of this family are dipeptidyl carboxydipeptidases ...
1-426
0e+00
Angiotensin-converting enzyme; Members of this family are dipeptidyl carboxydipeptidases (cleave carboxyl dipeptides) and most notably convert angiotensin I to angiotensin II. Many members of this family contain a tandem duplication of the 600 amino acid peptidase domain, both of these are catalytically active. Most members are secreted membrane bound ectoenzymes.
:
Pssm-ID: 460196 Cd Length: 581 Bit Score: 771.37 E-value: 0e+00
Angiotensin-converting enzyme; Members of this family are dipeptidyl carboxydipeptidases ...
1-426
0e+00
Angiotensin-converting enzyme; Members of this family are dipeptidyl carboxydipeptidases (cleave carboxyl dipeptides) and most notably convert angiotensin I to angiotensin II. Many members of this family contain a tandem duplication of the 600 amino acid peptidase domain, both of these are catalytically active. Most members are secreted membrane bound ectoenzymes.
Pssm-ID: 460196 Cd Length: 581 Bit Score: 771.37 E-value: 0e+00
Peptidase family M2, angiotensin converting enzyme (ACE); Peptidase family M2 angiotensin ...
1-417
0e+00
Peptidase family M2, angiotensin converting enzyme (ACE); Peptidase family M2 angiotensin converting enzyme (ACE, EC 3.4.15.1) is a membrane-bound, zinc-dependent dipeptidase that catalyzes the conversion of the decapeptide angiotensin I to the potent vasopressor octapeptide angiotensin II, by removing two C-terminal amino acids. There are two forms of the enzyme in humans, the ubiquitous somatic ACE and the sperm-specific germinal ACE, both encoded by the same gene through transcription from alternative promoters. Somatic ACE has two tandem active sites with distinct catalytic properties, whereas germinal ACE, the function of which is largely unknown, has just a single active site. Recently, an ACE homolog, ACE2, has been identified in humans that differs from ACE; it preferentially removes carboxy-terminal hydrophobic or basic amino acids and appears to be important in cardiac function. ACE homologs (also known as members of the M2 gluzincin family) have been found in a wide variety of species, including those that neither have a cardiovascular system nor synthesize angiotensin. ACE is well-known as a key part of the renin-angiotensin system that regulates blood pressure and ACE inhibitors are important for the treatment of hypertension.
Pssm-ID: 341055 Cd Length: 563 Bit Score: 666.62 E-value: 0e+00
Angiotensin-converting enzyme; Members of this family are dipeptidyl carboxydipeptidases ...
1-426
0e+00
Angiotensin-converting enzyme; Members of this family are dipeptidyl carboxydipeptidases (cleave carboxyl dipeptides) and most notably convert angiotensin I to angiotensin II. Many members of this family contain a tandem duplication of the 600 amino acid peptidase domain, both of these are catalytically active. Most members are secreted membrane bound ectoenzymes.
Pssm-ID: 460196 Cd Length: 581 Bit Score: 771.37 E-value: 0e+00
Peptidase family M2, angiotensin converting enzyme (ACE); Peptidase family M2 angiotensin ...
1-417
0e+00
Peptidase family M2, angiotensin converting enzyme (ACE); Peptidase family M2 angiotensin converting enzyme (ACE, EC 3.4.15.1) is a membrane-bound, zinc-dependent dipeptidase that catalyzes the conversion of the decapeptide angiotensin I to the potent vasopressor octapeptide angiotensin II, by removing two C-terminal amino acids. There are two forms of the enzyme in humans, the ubiquitous somatic ACE and the sperm-specific germinal ACE, both encoded by the same gene through transcription from alternative promoters. Somatic ACE has two tandem active sites with distinct catalytic properties, whereas germinal ACE, the function of which is largely unknown, has just a single active site. Recently, an ACE homolog, ACE2, has been identified in humans that differs from ACE; it preferentially removes carboxy-terminal hydrophobic or basic amino acids and appears to be important in cardiac function. ACE homologs (also known as members of the M2 gluzincin family) have been found in a wide variety of species, including those that neither have a cardiovascular system nor synthesize angiotensin. ACE is well-known as a key part of the renin-angiotensin system that regulates blood pressure and ACE inhibitors are important for the treatment of hypertension.
Pssm-ID: 341055 Cd Length: 563 Bit Score: 666.62 E-value: 0e+00
M3-like Peptidases, zincin metallopeptidases, include M2_ACE, M3A, M3B_PepF, and M32 families; ...
1-405
3.29e-117
M3-like Peptidases, zincin metallopeptidases, include M2_ACE, M3A, M3B_PepF, and M32 families; The peptidase M3-like family, also called neurolysin-like family, is part of the "zincin" metallopeptidases, and includes the M2, M3 and M32 families of metallopeptidases. The M2 angiotensin converting enzyme (ACE, EC 3.4.15.1) is a membrane-bound, zinc-dependent dipeptidase that catalyzes the conversion of the decapeptide angiotensin I to the potent vasopressor octapeptide angiotensin II. The M3 family is subdivided into two subfamilies: the widespread M3A, which comprises a number of high-molecular mass endo- and exopeptidases from bacteria, archaea, protozoa, fungi, plants and animals, and the small M3B, whose members are enzymes primarily from bacteria. Well-known mammalian/eukaryotic M3A endopeptidases are the thimet oligopeptidase (TOP; endopeptidase 3.4.24.15), neurolysin (alias endopeptidase 3.4.24.16), and the mitochondrial intermediate peptidase. The first two are intracellular oligopeptidases, which act only on relatively short substrates of less than 20 amino acid residues, while the latter cleaves N-terminal octapeptides from proteins during their import into the mitochondria. The M3A subfamily also contains several bacterial endopeptidases, called oligopeptidases A, as well as a large number of bacterial carboxypeptidases, called dipeptidyl peptidases (Dcp; Dcp II; peptidyl dipeptidase; EC 3.4.15.5). M3B subfamily consists of oligopeptidase F (PepF) which hydrolyzes peptides containing 7-17 amino acid residues with fairly broad specificity. Peptidases in the M3 family contain the HEXXH motif that forms part of the active site in conjunction with a C-terminally-located Glutamic acid (Glu) residue. A single zinc ion is ligated by the side-chains of the two Histidine (His) residues, and the more C-terminal Glu. Most of the peptidases are synthesized without signal peptides or propeptides, and function intracellularly. There are similarities to the thermostable carboxypeptidases from Pyrococcus furiosus carboxypeptidase (PfuCP), and Thermus aquaticus (TaqCP), belonging to peptidase family M32. Little is known about function of this family, including carboxypeptidases Taq and Pfu.
Pssm-ID: 341049 [Multi-domain] Cd Length: 473 Bit Score: 353.66 E-value: 3.29e-117
Database: CDSEARCH/cdd Low complexity filter: no Composition Based Adjustment: yes E-value threshold: 0.01
References:
Wang J et al. (2023), "The conserved domain database in 2023", Nucleic Acids Res.51(D)384-8.
Lu S et al. (2020), "The conserved domain database in 2020", Nucleic Acids Res.48(D)265-8.
Marchler-Bauer A et al. (2017), "CDD/SPARCLE: functional classification of proteins via subfamily domain architectures.", Nucleic Acids Res.45(D)200-3.
of the residues that compose this conserved feature have been mapped to the query sequence.
Click on the triangle to view details about the feature, including a multiple sequence alignment
of your query sequence and the protein sequences used to curate the domain model,
where hash marks (#) above the aligned sequences show the location of the conserved feature residues.
The thumbnail image, if present, provides an approximate view of the feature's location in 3 dimensions.
Click on the triangle for interactive 3D structure viewing options.
Functional characterization of the conserved domain architecture found on the query.
Click here to see more details.
This image shows a graphical summary of conserved domains identified on the query sequence.
The Show Concise/Full Display button at the top of the page can be used to select the desired level of detail: only top scoring hits
(labeled illustration) or all hits
(labeled illustration).
Domains are color coded according to superfamilies
to which they have been assigned. Hits with scores that pass a domain-specific threshold
(specific hits) are drawn in bright colors.
Others (non-specific hits) and
superfamily placeholders are drawn in pastel colors.
if a domain or superfamily has been annotated with functional sites (conserved features),
they are mapped to the query sequence and indicated through sets of triangles
with the same color and shade of the domain or superfamily that provides the annotation. Mouse over the colored bars or triangles to see descriptions of the domains and features.
click on the bars or triangles to view your query sequence embedded in a multiple sequence alignment of the proteins used to develop the corresponding domain model.
The table lists conserved domains identified on the query sequence. Click on the plus sign (+) on the left to display full descriptions, alignments, and scores.
Click on the domain model's accession number to view the multiple sequence alignment of the proteins used to develop the corresponding domain model.
To view your query sequence embedded in that multiple sequence alignment, click on the colored bars in the Graphical Summary portion of the search results page,
or click on the triangles, if present, that represent functional sites (conserved features)
mapped to the query sequence.
Concise Display shows only the best scoring domain model, in each hit category listed below except non-specific hits, for each region on the query sequence.
(labeled illustration) Standard Display shows only the best scoring domain model from each source, in each hit category listed below for each region on the query sequence.
(labeled illustration) Full Display shows all domain models, in each hit category below, that meet or exceed the RPS-BLAST threshold for statistical significance.
(labeled illustration) Four types of hits can be shown, as available,
for each region on the query sequence:
specific hits meet or exceed a domain-specific e-value threshold
(illustrated example)
and represent a very high confidence that the query sequence belongs to the same protein family as the sequences use to create the domain model
non-specific hits
meet or exceed the RPS-BLAST threshold for statistical significance (default E-value cutoff of 0.01, or an E-value selected by user via the
advanced search options)
the domain superfamily to which the specific and non-specific hits belong
multi-domain models that were computationally detected and are likely to contain multiple single domains
Retrieve proteins that contain one or more of the domains present in the query sequence, using the Conserved Domain Architecture Retrieval Tool
(CDART).
Modify your query to search against a different database and/or use advanced search options
